Ingenico Input Devices Driver Download For Windows 10



This Realtek Audio Driver for Windows 10 64 bit will install for many laptop (notebook)/Desktop computers that use the Realtek sound chip. This driver is only for the 64bit version of Windows. Some versions of Windows have generic or older OEM drivers included with the system. It is important that you use the latest audio drivers because you will get some extra feature that might not be available to you with a generic drivers.

Windows 10 version 1909 is know like other updates and releases to have issues with the Realtek audio chipsets and updating the drivers is one remedy. If you are getting a code 10 error follow this guide: Fix: this device cannot start (code 10) - Windows 10 because you don't always have to install new drivers.

In Internet Explorer, click Tools, and then click Internet Options. On the Security tab, click the Trusted Sites icon. Click Sites and then add these website addresses one at a time to the list: You can only add one address at a time and you must click Add after each one. If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10. If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer.

The Realtek Audio codec is currently still at version: R2.82 this is still the current driver for August 2020

  • Direct Sound 3D, A3D, and I3DL2 compatibility;
  • WaveRT audio driver for Windows;
  • A wide range of software equalizing tools;
  • Microphone acoustic echo cancellation;
  • Noise suppression feature;
  • Beamforming technology for voice application;
  • Easy-to-use plug-and-play technology;
  • Well-laid out and easy-to-use interface.
Show: Full Specs/Additional configurationsFree

---------------------------------------
Setup Driver at first time:
---------------------------------------
Windows 2000 , XP :
Step 1. Before installing the Realtek High Definition Audio Driver, Press the
[Cancel] button if Windows detect the Multimedia Audio device.
Step 2. Run the setup.exe program to start the installation.
Step 3. Click on [Next] to continue the procedure. If the screen resolution is lower
than 1024*768,press [Yes] to continue the installation. If the Windows popup
'Digital Signature Not Found' message, press [Yes] to continue the
installation.
Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

Windows Vista, Windows7, Windows 8, Windows 8.1, Windows 10 :
Step 1. Run the setup.exe program to start the installation.
Step 2. Click on [Next] to continue the procedure. If the screen resolution is lower
than 1024*768,press [Yes] to continue the installation. If the Windows popup
'Windows can't verify the publisher of this driver software' message,
press 'Install this driver software anyway' to continue the installation.
Step 3. Finally, select to restart the system and press [Finish] to complete
the installation.

---------------------------------------
Manual driver install by INF :
---------------------------------------
Step 1. Go to 'Control Panel¡¨and select 'Hardware and Sound'.
Step 2. Select 'Device Manager' on Devices and Printers
Step 3. Right click on the 'High Definition Audio Device' of Device Manager and select 'Update Driver Software' on pop up menu.
Step 4. Select 'Browse my computer for driver software' option.
Step 5. Browse Realtek Audio driver location and press 'Next' button.
Step 6. Installing Realtek Audio driver.
Step 7. Windows has finished installing the Realtek audio driver.

---------------------------------------
Update Driver:
---------------------------------------
Windows 2000 , XP :
Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

Windows Vista, Windows7, Windows 8, Windows 8.1, Windows 10 :
Step 1. Run setup.exe, it will remove the original driver in your system.

Step 2. Click 'Next' to remove the original audio driver in your system.

Step 3. Once after the original driver removed , reboot the computer.

Step 4. It will install audio driver automatically after computer restarted.

Ingenico input devices driver download for windows 10 64

---------------------------------------
Remove Driver:
---------------------------------------
Windows 2000 , XP :
Step 1. Go to StartSettingsControl Panel.

Step 2. Select [Add or Remove Programs] icon.

Step 3. Select 'Realtek High Definition Audio Driver' and press [Remove]
button.

Step 4. Click on [Yes] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

Windows Vista, Windows7 :
Step 1. Go to StartControl Panel.

Step 2. Select [Programs] icon.

Step 3. Select [Programs and Features] icon.

Step 4. Select 'Realtek High Definition Audio Driver' and press [uninstall] button.

Step 5. Click on [Yes] to finish the uninstallation.

Step 6. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

Windows 8, Windows 8.1, Windows 10 :
Step 1. Go to Apps.

Step 2. Select 'Control Panel' in 'Windows System'

Step 3. Select [Programs and Features] icon.

Step 4. Select 'Realtek High Definition Audio Driver' and press [uninstall] button.

Step 5. Click on [Yes] to finish the uninstallation.

Step 6. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

---------------------------------------
Driver uninstall in Device Manager :
---------------------------------------
Step 1. Go to 'Control Panel¡¨and select 'Hardware and Sound'.
Step 2. Select 'Device Manager' on Devices and Printers
Step 3. Right click on the 'Realtek High Definition Audio' of Device Manager and select 'Uninstall' on pop up menu.
Step 4. Select the option 'Delete the driver software for this device' and press 'OK' button on dialog 'Confirm Device Uninstall'.
Step 5. Reboot system.

1. Features

WO Mic can turn your phone to be a microphone for your computer. You need not to pay a cent to buy any gadget. And it's mobile if you choose wireless transport. Millions of people have installed it and are using it daily for talking, recording, voice remote control and many other activities.

Three components cooperate to achieve that:

  1. WO Mic App which runs on phone. It captures your voice through phone microphone and transmit them to computer.
  2. WO Mic Client which runs on computer. It connects to app, receives voice data and passes them to virtual mic device.
  3. WO Mic Virtual Device which also runs on computer, though in kernel space. It receives voice data from client program, simulates a real microphone device, and provides audio data to applications like Sound Recorder.

Below diagram shows how captured voice data is flowing through these components:

Main features:

  • Wireless microphone without any cost
  • Can be used with any programs on PC just like REAL microphone
  • Very short lag
  • Easy to configure and use
  • Supports auto reconnection when your PC reboots
  • Support multiple connection methods: USB, Bluetooth, Wi-Fi, and Wi-Fi direct
  • Audio format: 48000 sampling rate, 16 bits per sample, mono channel

2. Download and install

You need to install all 3 WO Mic components mentioned above. Note below sections assume Windows operating system on PC. If you are running Linux, refer to Linux setup.

2.1 Install app on phone


If you cannot access Google Play market, download WO Mic apk directly.

2.2 Install client on PC

Download and run the setup program to install the client.

FileSizeVersion
WO Mic client for Windows1,151,945 bytes4.7

2.3 Install device driver on PC

WO Mic device drivers are available for Win7/8/10. Supported processors are x86 and x64.

FileSizeVersion
WO Mic device driver for Windows242,645 bytes1.6.0.0

Once the driver is installed successfully, WO Mic device will be created automatically. Follow these steps to check if the device exists and is working properly:

  • Press Windows + X and click Device Manager in the pop menu.
  • In Device Manager, go to Sound, video and game controllers.
  • WO Mic device should be listed and work well as shown in below diagram.

3. User guide

3.1 Choose transport

Depending on system, different transports may be selected as the communication channel between your phone and computer:
  • iPhone: Wi-Fi
  • Android: USB, Bluetooth, Wi-Fi and Wi-Fi Direct
Choose appropriate transport you shall use.
3.1.1 USB transport

Download Windows 10

We recommend USB transport whenever possible, as it is more robust than wireless connections. It also has lower latency and higher bit rate. To use USB connection, follow these:
  • Connect your phone and PC via an USB cable.
  • Enable USB debugging on Android phone.
  • On PC, install right USB driver for your phone. You may consult your vendor for that.
If all have been done well, your phone is identified as one USB device with name 'ADB Interface': Windows
  • Press Windows + X and click Device Manager in the pop menu.
  • In Device Manager, go to Universal Serial Bus devices.
  • In the list, you are expected to find something like ADB Interface.

3.2 Configure and start server on phone

Launch WO Mic on phone. Before staring the server, you can go to Settings to configure what you prefer.

3.2.1 Transport option
Select the transport you would. Requirements for each transport:
  • USB transport. ADB Interface should be seen as described in 3.1.1; otherwise it will report no device can be detected.
  • Bluetooth. Pair your phone with computer if you haven't done that. Turn on Bluetooth on both phone and computer.
  • Wi-Fi. Turn on Wi-Fi on both phone and computer and connect them to same hotspot.
  • Wi-Fi Direct. Turn on SoftAP on phone and connect PC to this AP.
3.2.2 Control port option
This port number should be same as in client; otherwise, connection will fail. If no special reasons, don't change it.

Note media port can only be configured in client. It shall be synced to server when making connection.

3.2.3 Audio source option

There are 5 mic modes. Due to different Android phone hardware and OEM customization, not all modes may be supported on your phone. Even some are supported, they may not have same effect as described here. So please take below mode description as a hint and explore each mode on your phone to select appropriate one.

  • Default. Phone embedded microphone.
  • Mic mode 1. Try this if you want to use external wired headset.
  • Mic mode 2. Try this if there are echoes with other modes.
  • Mic mode 3. Try this if you will speak at a long distance or noisy environment.
  • Rear mic. Try this if you want to better capture sound from back.

Ingenico Input Devices Driver Download For Windows 10 32-bit

3.2.4 Start server

Once all have been configured, go to main UI and press Start button to start server. If it prompts not enough permission, grant microphone or audio record permission to this app.

Once the state changes to Started or Connectable, the server is ready to accept connection request from client.

3.3 Connect from client

On Windows, follow these steps to connect:
  1. Launch WO Mic client. If you meet 'MSVCP140.dll is missing' or similar error on Win7/8/8.1, please either upgrade your Windows, or install KBA2999226 and KBA3118401 from Microsoft.
  2. Select Connection ->Connect...
  3. In connect dialog, select same transport type as you did on phone in 3.2.
  4. In Details pane, specify auxiliary connection parameters:
    • Bluetooth. Select the phone Bluetooth name in the dropdown list.
    • USB. None.
    • Wi-Fi. Enter the IP address shown on server.
    • Wi-Fi Direct. Enter the IP address of SoftAP. Use the default if you don't know what it is.
  5. Click Connect.

Once client shows to be connected, audio data captured by phone will be streamed to computer.

Ingenico Input Devices Driver Download For Windows 10 64

3.4 Verify streaming is going well

Before using WO Mic device, you may want first to verify audio is being streamed correctly from phone to PC. To do that, play received audio data directly:
  • Click Options menu in WO Mic client.
  • Enable Play in speaker.
  • Unmute PC speaker.
If everything goes well, you can hear sound captured by phone.

3.5 Use WO Mic device

Ingenico Input Devices Driver Download For Windows 10

Set WO Mic device as input for your game, recording, chat or any other applications.

Some applications may not allow you to select audio device. For that case, you can set WO Mic device to be default audio recording device in Windows settings.

Ingenico Input Devices Driver Download For Windows 10


3.6 Issues caused by anti-virus software

Some anti-virus or firewall software make wrong alarms about WO Mic client or driver. They might even delete related files or block network connection causing WO Mic to malfunction. If you meet those issues, please configure your computer to allow WO Mic to work.

Especially, if WO Mic used to work well and stops working suddenly, it's mostly caused by anti-virus software blocking. Some quick verifications:

  • Change control port from default 8125 to some other value (i.e. 40000) and connect again. Note: same value should be configured on phone app.
  • Re-install client program to some other folder (pretending to be different program) and connect again.

Warning: Never download and install WO Mic client and driver setup programs from untrusted sites. Download from this page(https://wolicheng.com/womic/) and check if downloaded file size matches the informed value.

Contact

Before reporting any issues to us, you are encouraged to check this FAQ page for any known issues and their solutions.

You can contact us at support@wolicheng.com.